Our cleaners eliminate any remains of wax, surface treatment or any other previously used residues, etc. and allow a perfect adhesion of our sealants and mould releases.


Sealers are used to close microspores and surface defects, which may result sticking points during the manufacturing process and facilitating the action of our mould releases.


Based on high performance polymers, it brings to the surface of the mould high anti-sticking properties and lubricity, facilitating de release process.


Specific formulations designed for the treatment of certain surfaces which protect against the action of external agents, use damage and vandalism.



Ababol Products is an R+D+i company dedicated at the Chemistry Developments. Our challenge is to substitute hazardous products in the industry for other environmentally friendly products and improving their technical properties.

In Ababol Products we have developed high performance polymers for the integral treatment of moulds which characteristics are: no contaminating transfer, no build up and ensure a perfect release.

  • Demoulding different products: epoxy composite polymer matrix, polyester, acrylic and phenolic, rubbers and elastomers, polyethylene, polypropylene and polyurethane, etc.
  • All kinds of processes: RTM, Rotomolding, Infusion, FRP, casting, injection, etc.
  • Demoulding on a wide variety of moulds: polyester, vinyl ester, metal, glass, etc.

For further information on the possibilities of our mould release agents, cleaners and sealers products.

Do not hesitate to contact our technical staff, we will be happy to help and advise you about the possibilities of our products and to improve efficiency that will achieve the best results in your industrial processes.