Ababol C is a solvent hazardous-free cleaner that’s biodegradable. It is recommended as alternative to high toxicity products such as methyl chloride, acetone, styrene and solvent cleaners. Used for cleaning tools, moulds, machinery, polyurethane foam injection, etc.
Due its very low evaporation and no risk H or P sentences in MDS, it is especially recommended for application into industrial plants.
It is a highly effective cleaner that removes surface dirt, waxes and uncured material without damaging the mould surface or changing their brightness. ABABOL C is very effective in cleaning uncured gel coats and resins.
Ababol C can also be used for general cleaning, except on PET.
Apply the product over the surface to be cleaned using a piece of paper, towel or non-abrasive brush. Ababol C is a cleaner free of solvents, as a consequence some dirt particles, wax, old demould agents or sealers residues may still be present, if so we recommend cleaning by rubbing with a piece of paper, towel or a non-abrasive brush.
Wait for one to two minutes to allow the product to perform before wiping off as this product has no evaporation. Wipe off with paper, clean cloth, pads, brushes, sponges or any other material that does not grate the surface to be cleaned.
Because Ababol C is solvent free and not flammable, it can be used with mechanical tools which could aid the cleaning process.
Repeat the above process as many times as needed until all the dirt and pollution has been completely removed.
When you are sure all the pollution (dirt) has been removed from the mould it is very important to remove any remaining residual of Ababol C cleaner. This must be done with a clean, wet cloth or clean wet paper, wet the cloth or paper with water or alcohol, wipe over several times until ALL remaining cleaner has been completely removed. If any Abobol C remains in the mould the sealer will not be effective.
Before applying the sealer, make sure the the mould and the surface is completely dry with no lubricity.
- Keep the lid closed and store in an areas free of humidity, avoiding high temperatures.
- Keep it away from acids and strong oxidant products.
- Do not mix Ababol C with any other products. THIS COULD PRODUCE FLAMMABLE GASES.
If you have any concerns, questions or want to learn more about the possibilities of this product and its efficiency to achieve the best results please contact our technical staff who will be happy to help and advise you.