ABABOL Dry Cleaner

It is a cleaner product based in a different solid particles composition, specially recommended for metallic moulds, such as the used in the rotational moulding and rubber industry.
The easiness cleaning, even the most embedded dirt, made it very recommended for replace other cleaners with high concentration of solvents often are not effective.
If you want a glossy finish, after cleaning it will be necessary to brighten the surface.
Ababol DRY CLEANER must be applied with spry gun.
Characteristics
Introduce the application spray gun aspiration in ABABOL DRY CLEANER and adjust the application pressure under 5Kg. Apply on the mould surface about 25cm away from distance. Then, make the necessary passes until all the residue is removed from the mould surface.
Finally remove the left DRY CLEANER of the mould surface and be sure there is no cleaner left before to apply the sealers and release agents.
If you need more information about our Ababol products, you can visit our web www.ababoldemould.com or contact with us sending an email at contacto@cladescomposites.com